HD 60cm Fluorescence DTF Printer and Shaker 2 in 1

No, DTF printing requires special DTF ink. Printing with DTG ink on DTF film will make the ink run and mix with white and CMYK.

Inks from different manufacturers cannot be mixed and need to be cleaned with special cleaning fluid or pure water

Printing one square meter consumes about 3 grams of powder and 20g of ink (all colors)

DTF printing still requires the same maintenance that DTG needs. Just not as often. DTG ink does not clog up as bad and when clogs do happen, they are a lot easier to clean. DTF white ink still separates and will need a daily shake. Best form of maintenance is regular printing. If you print every 2 days, all you will need to do is shake the ink and run an automatic printhead clean before printing.

Solution: Print an image on a PVC shet with high resolution once. After the image is printed, put the PVC sheet on the fatbed printer and print apain. If the image is very clear after twice printing, it means the printer is a high resolution.